Lashing Equipment lashing and lifting systems Lifting Gear
Lashing Equipment and Lifting devices. Lashing and lifting systems for container roro and general cargo ships
Lashing Securing equipment, securing systems and lifting devices, spreaders, lifting beams for the shipping industry
We are an Antwerp based company specialized in the design production and supply of
securing gear, twistlocks, spreaders, turnbuckles,
mooring panama chock anti skid mat lashing
d-rings, convex car lashing points, cargo and car webbing, trailerhorse, wheel chocks
vehicles gear, container semi automatic spreaders, hooks slings and lugs
u-frame foundations and twistlocks, raised iso foundations, intermediate stackers and twistlocks
trailerhorse, chains, levers,osha twistlocks, semi-automatic twistlock, satl,
imo manuals, for containers vehicles roro and general cargo ships.
We are situated in the port of Antwerp, Belgium.
Container Technics Antwerp worldwide designer producer and supplier of container lashing and securing arrangements and spare parts acc. latest regulations of OSHA, IMO and other class approval societies.
We produce tailor-made Lashing solutions for all the shipping requirement
Ours products are approved by all the major class society Lloyd, German Lloyd, RINA, Bureau Veritas.
Please visit also our sister website at
Lashing and lifting
HEAVY LIFTING SYSTEMS FOR CONTAINER AND RORO VESSELS
Made to custom requirement to satisfy any lifting requirement.
Semi automatic spreader
Standard for 20' or 40' containers sizes, these spreaders have max 42ton safe working load, manually operated spreaders ere also available.
Grommet slings according to EN13414 all size and SWL.
Heavy Duty lifting beam
Available in differents models with SWL up to 2000t.
Gear for Hatch covers
Standard for 20' or 40' container positions.
Hooks and Lugs
Mainly used to lift empty containers they can be attached to wires for top lift connection or bottom side lift connection.
Fixed lashing container securing devices
Flush Lashing Fittings:
These are fitted recessed into the deck or tank top and should be welded flush with the deck plates.
This fitting is recessed into the deck and are supplied as a single, double transversal, double longitudinal or a quadruple iso deck fitting, and when fitted should be welded flush with the deck.
These are recessed into the deck and supplied as a single, double or triple lashing point, and when fitted should lie flush.
Iso deck sockets
These are welded on hatch covers and are standard 110mm in height.Other height available on request.
These are slightly raised and can be supplied with different heights. They can be welded (fitted) to hatch covers, tank tops or on decks.
Basically the same as The U-Frames 45° only stronger. BL welded to weather deck, hatch covers and stanchion. Supplied as single, double, etc. It accepts bottom twistlocks 55°.
Sometimes referred as Dovetail foundations welded to weather deck, hatch covers and stanchion. Supplied as single, double, etc. It accepts bottom twistlocks 45°.
Aluminum in construction and length to custom requirements.Designed actuator head to open close Twistlocks and semi automatic twistlocks.
Coupled to u-frames cones, locking cone when container is lowered into position also bottom cones operated by locking pins.
Spanner for Turnbuckle
Used to lock unlock Bridgefittings turnbuckles and open house turnbuckle.
Used for Plugging iso hole in deck fittings can be supplied in rubber or plastic, thus preventing sea water to fill the hole and eventual corrosion.
Loose container securing devices
Twistlocks are devices to securely lock the four corners of a container the types offered are, twin cones; three positions manually operated,wide middle plate type twistlock, two position manually operated twistlock, also a fixed base with single cone locking twistlock. a semi_automatic locking twistlock is also available.
Used in the holds fit in the container corner casting.
Sometimes referred as to as stacking cones are supplied as single double automatic and safety type are used between containers tiers
Breech base twistlock
Fit in the breech base deck fitting.
Two locking nuts available 30 and 50 mm bridge fittings are used to lock together the top containers of adjacent stacks.
intermediate pressure support
fitted between the container and hatchcoaming they stabilize the container stack
are used to level up containers on adjacent stacks by inserting into iso hole
Supplied in several lengths and configuration and made in high tensile steel.Used with turnbuckles to secure containers to the deck
They are used with Lashing Rods or wire to lash down container stacks in a arrangement devised by cargo securing manual, the roro turnbuckle is used with a chain and connect to the deck. this combinations is used to secure rolling cargo and trailers.
U-Frame Locking cone
there are two types of angular base 45° and 55° with standard or low profile, both slide in the into the U-Frame deck fitting and when the container drops into position the locking pin is inserted and locked.
can be supplied as 45° and 55° with standard or low profile, they are opened or locked by manually operated levers.
Car lifting gear
Truck lifting gear
Truck lifting gear double beam
Base Line load Twistlock 55°
osha intermediate stacker
Safety stacker satl
line load base twistlock 45°
Flush Lashing pot
tie down webbing
Webbing with Ratchet
Semi-Automatic Twistlock satl
transversal base twistlock 55°
Webbing with Ratchet
trailer lashing ratchet
lashing equipment, lashing, lifting, twistlock, spreaders, containers, roro, gear, systems, container, turnbuckles,chain, securing, cone, levers, chains, trailerhorse, osha, satl. All those equipment and more can be delivered worldwide from stock